Piezoelectric Ceramic Electrical Testing Solution
Technical Specifications & Test Capabilities
| Parameter / Metric | Specification Range & Accuracy | Operational Notes |
|---|---|---|
| Total Characterized Parameters | 26 fundamental electrical & electromechanical parameters | Density, εr, tanδ, K33, Kt, Kp, K31, K15, Tc, Nyquist, Cole-Cole, ρv, Eb, σ, TSDC, d33, d31, d15, d33-T, PE Loop, PUND, Voc/Isc |
| Full Lifecycle Coverage | Material preparation, electrode silvering, poling, to testing & aging | Complete one-stop experimental support |
Specimen Geometry & Preparation Guide
| Material Form | Recommended Dimensions | Dimensional Limits | Electrode & Poling Notes |
|---|---|---|---|
| Discs, cylinders, and bars | Ø20×2 mm, Ø6×15 mm, 30×5×1 mm | Refer to individual testing mode guidelines | MatMeas provides metallization and high-voltage poling in-house |
Testing Function
Our comprehensive Piezoelectric Ceramic Testing Solution covers the complete electromechanical lifecycle from bare ceramic pellet to fully poled and aged resonator. Spanning 26 specialized characterization parameters—including direct quasi-static d33/d31/d15 constants, in-situ high-temperature depoling up to 700°C, all five IEEE resonance modes (Kp, kt, K33, K31, K15), P-E hysteresis loops, dielectric temperature spectra, and mechanical quality factor Qm—we empower academic researchers and industrial PZT manufacturers with CMA-certified precision data.
Integrated Piezoelectric Testing Cluster
Our accredited laboratory provides seamless end-to-end characterization across individual testing protocols:
Testing Conditions
Primary Instruments: PEAL-1000, PEMS-1000, PCA-1000, OBP-30KV
Standard Turnaround: 3–5 working days
Key Standards: GB/T 3389-2008; GB/T 11309-1989; GB/T 2414.1/2-1998; IEEE 176
Sample Requirements
Please review the detailed specimen dimensions, electrode requirements, and poling conditions in the table above. Custom dimensions and special sample geometry can be accommodated upon technical consultation.
Testing Standards
- GB/T 3389-2008
- GB/T 11309-1989
- GB/T 2414.1/2-1998
- IEEE 176
Test Results
Clients receive comprehensive test reports with raw exported ASCII/txt data files, high-resolution curve plots (temperature spectra, impedance plots, or hysteresis loops), and experimental condition parameters stamped by our CMA accredited testing center.
Turnkey Equipment for Your Own Laboratory
Prefer in-house characterization? Every test in our laboratory is performed using MatMeas turnkey instruments. Verify measurement quality with sample testing before capital procurement.
PEMS-1000 High-Precision In-Situ d33 System
PCA-1000 Piezoelectric Parameter Analyzer
PEAI-1000 High-Precision Piezoelectric Analyzer
Request High-Precision Testing Solutions
Get expert guidance and customized instruments for your functional materials project.